dbox Mailbox Format
dbox is Dovecot's own high-performance mailbox format. The original version was introduced in v1.0 alpha4, but since then it has been completely redesigned in v1.1 series and improved even further in v2.0.
One of the main reasons for dbox's high performance is that it uses Dovecot's index files as the only storage for message flags and keywords, so the indexes don't have to be "synchronized". Dovecot trusts that they're always up-to-date (unless it sees that something is clearly broken).
DANGER
You must not lose the dbox index files, as they can't be regenerated without data loss!
dbox has a feature for transparently moving message data to an alternate storage area.
dbox storage is extensible. Single instance attachment storage was already implemented as such extension.
dbox Modes
single-dbox (sdbox
)
One message per file, similar to Maildir.
For backwards compatibility, dbox
is an alias to sdbox
in mail_location
.
multi-dbox (mdbox
)
Multiple messages per file,but unlike mbox stores multiple files per mailbox.
Layout
By default, the dbox filesystem layout is as follows.
Data which isn't the actual message content is stored in a layout common to both sdbox
and mdbox
.
In these tables <root>
is shorthand for the mail location root directory on the filesystem.
Index files can be stored in a different location by using the INDEX
parameter in the mail location specification. If the INDEX
parameter is specified, it will override the mail location root for index files and the "map index" file (mdbox only
).
Location | Description |
---|---|
<root>/mailboxes/INBOX/dbox-Mails/dovecot.index* | Index files for INBOX |
<root>/mailboxes/foo/dbox-Mails/dovecot.index* | Index files for mailbox "foo" |
<root>/mailboxes/foo/bar/dbox-Mails/dovecot.index* | Index files for mailbox "foo/bar" |
<root>/dovecot.mailbox.log* | Mailbox changelog |
<root>/subscriptions | Subscribed mailboxes list |
<root>/dovecot-uidvalidity* | IMAP UID validity |
Note that with dbox the Index files contain significant data which is held nowhere else. Index files for both sdbox
and mdbox
contain message flags and keywords.
For mdbox
, the index file also contains the map_uids which link (via the "map index") to the actual message data. This data cannot be automatically recreated, so it is important that Index files are treated with the same care as message data files.
Actual message content is stored differently depending on whether it is sdbox
or mdbox
.
Message Storage: sdbox
Location | Description |
---|---|
<root>/mailboxes/INBOX/dbox-Mails/u.* | Numbered files (u.1 , u.2 , ...) each containing one message of INBOX |
<root>/mailboxes/foo/dbox-Mails/u.* | Files each containing one message for mailbox "foo" |
<root>/mailboxes/foo/bar/dbox-Mails/u.* | Files each containing one message for mailbox "foo/bar" |
Message Storage: mdbox
Location | Description |
---|---|
<root>/storage/dovecot.map.index* | "Map index" containing a record for each message stored |
<root>/storage/m.* | Numbered files (u.1 , u.2 , ...) each containing one or multiple messages |
The directory layout (under ~/mdbox/
) is:
Location | Description |
---|---|
~/mdbox/storage/ | The mail data for all mailboxes |
~/mdbox/mailboxes/ | Directories for mailboxes and their index files |
The storage
directory has files:
File | Description |
---|---|
dovecot.map.index* | The "map index" |
m.* | Mail data. Each m.* file contains one or more messages. mdbox_rotate_size can be used to configure how large the files can grow. |
The "map index" contains a record for each message:
Key | Description |
---|---|
map_uid | Unique growing 32 bit number for the message. |
refcount | 16 bit reference counter for this message. Each time the message is copied the refcount is increased. |
file_id | File number containing the message. For example if file_id=5, the message is in file m.5 . |
offset | Offset to message within the file. |
size | Space used by the message in the file, including all metadata. |
Mailbox indexes refer to messages only using map_uids. This allows messages to be moved to different files by updating only the map index. Copying is done simply by appending a new record to mailbox index containing the existing map_uid and increasing its refcount. If refcount grows over 32768, currently Dovecot gives an error message. It's unlikely anyone really wants to copy the same message that many times.
Expunging a message only decreases the message's refcount. The space is later freed in "purge" step. This is typically done in a nightly cronjob when there's less disk I/O activity. The purging first finds all files that have refcount=0 mails. Then it goes through each file and copies the refcount>0 mails to other mdbox files (to the same files as where newly saved messages would also go), updates the map index and finally deletes the original file. So there is never any overwriting or file truncation.
The purging can be invoked explicitly running doveadm purge
.
There are several safety features built into dbox to avoid losing messages or their state if map index or mailbox index gets corrupted:
- Each message has a 128 bit globally unique identifier (GUID). The GUID is saved to message metadata in
m.*
files and also to mailbox indexes. This allows Dovecot to find messages even if map index gets corrupted. - Whenever index file is rewritten, the old index is renamed to
dovecot.index.backup
. If the main index becomes corrupted, this backup index is used to restore flags and figure out what messages belong to the mailbox. - Initial mailbox where message was saved to is stored in the message metadata in
m.*
files. So if all indexes get lost, the messages are put to their initial mailboxes. This is better than placing everything into a single mailbox.
Alternate Storage
Unlike Maildir, with dbox the message file names don't change. This makes it possible to support storing files in multiple directories or mount points. dbox supports looking up files from "altpath" if they're not found from the primary path. This means that it's possible to move older mails that are rarely accessed to cheaper (slower) storage.
When messages are moved from primary storage to alternate storage, only the actual message data (stored in files u.*
under sdbox
and m.*
under mdbox
) is moved to alternate storage; everything else remains in the primary storage.
Message data can be moved from primary storage to alternate storage using doveadm altmove
.
The granularity at which data is moved to alternate storage is individual messages. This is true even for mdbox
when multiple messages are stored in a single m.*
storage file. If individual messages from an m.*
storage file need to be moved to alternate storage, the message data is written out to a different m.*
storage file (either new or existing) in the alternate storage area and the "map index" updated accordingly.
Alternate storage is completely transparent at the IMAP/POP level. Users accessing mail through IMAP or POP cannot normally tell if any given message is stored in primary storage or alternate storage. Conceivably users might be able to measure a performance difference; the point is that there is no IMAP/POP command which could be used to expose this information. It is entirely possible to have a mail folder which contains a mix of messages stored in primary storage and alternate storage.
Configuration
To enable this functionality, use the ALT
parameter in mail_location
. For example:
mail_location = mdbox:/var/vmail/%d/%n:ALT=/altstorage/vmail/%d/%n
will make Dovecot look for message data first under /var/vmail/%d/%n
("primary storage"), and if it is not found there it will look under /altstorage/vmail/%d/%n
("alternate storage") instead. There's no problem having the same (identical) file in both storages.
Keep the unmounted /altstorage
directory permissions such that Dovecot mail processes can't create directories under it (e.g. root:root 0755
). This way if the alt storage isn't mounted for some reason, Dovecot won't think that all the messages in alt storage were deleted and lose their flags.
dbox and Mail Header Metadata
Unlike when using mbox, where mail headers (for example Status
, X-UID
, etc.) are used to determine and store metadata, the mail headers within dbox files are (usually) not used for this purpose by Dovecot; neither when mails are created/moved/etc. via IMAP nor when dboxes are placed (e.g. copied or moved in the filesystem) in a mail location (and then "imported" by Dovecot).
Therefore, it is (usually) not necessary, to strip any such mail headers at the MTA, MDA, or LDA (as it is recommended with mbox).
There is one exception, though, namely when pop3_reuse_xuidl = yes
: in this case X-UIDL
is used for the POP3 UIDLs. Therefore, in this case, is recommended to strip the X-UIDL
mail headers case-insensitively at the mail delivery layer.
Accessing Expunged Mails with mdbox
mdbox_deleted
storage can be used to access mdbox's all mails that are completely deleted (reference count = 0). The mdbox_deleted
parameters should otherwise be exactly the same as mdbox
's. Then you can use e.g. doveadm fetch
or doveadm import
commands to access the mails.
For example, if you have mail_location=mdbox:~/mdbox:INDEX=/var/index/%u: doveadm import mdbox_deleted:~/mdbox:INDEX=/var/index/%u "" subject oops
.
This finds a deleted mail with subject "oops" and imports it into INBOX.
Mail Delivery
Some MTA configurations have the MTA directly dropping mail into Maildirs or mboxes. Since most MTAs don't understand the dbox format, this option is not available. Instead, the MTA should use LMTP Server or LDA.
dbox Configuration
Settings
mdbox_preallocate_space
Default | no |
---|---|
Value | boolean |
See Also |
mdbox only: If enabled, preallocate space for newly created files.
In creation of new mdbox files, their size is immediately
preallocated as mdbox_rotate_size
.
This setting currently works only in Linux with certain filesystems (ext4 and xfs).
mdbox_rotate_interval
Default | [None] |
---|---|
Value | size |
See Also |
mdbox only: The maximum age the dbox file may reach before it's rotated.
0
means there is no age-based rotation.
mdbox_rotate_size
Default | 10M |
---|---|
Value | size |
See Also |
mdbox only: The maximum size the dbox file may reach before it is rotated.
Mail Location
sdbox
To use single-dbox, use the tag sdbox
in mail_location
:
# single-dbox
mail_location = sdbox:~/dbox
For backwards compatibility, dbox
is an alias to sdbox
in the mail location. (This usage is deprecated.)
mdbox
To use multi-dbox, use the tag mdbox
in mail_location
:
# multi-dbox
mail_location = mdbox:~/mdbox
Default mail_location
Keys
For dbox, the default mail_location keys: are:
Key | Default Value |
---|---|
MAILDIRBOX | mailboxes/ |
FULLDIRNAME | dbox-Mails/ |